Comments on: Creating Your Own AutoCAD Palette http://cad-notes.com/2009/09/creating-your-own-autocad-palette/ CAD Tutorials and Best Practices for professionals and students Wed, 16 May 2012 16:51:00 +0000 hourly 1 http://wordpress.org/?v=3.3.2 By: Nicolas MARIE http://cad-notes.com/2009/09/creating-your-own-autocad-palette/#comment-4963 Nicolas MARIE Tue, 13 Jul 2010 12:01:58 +0000 http://cad-notes.com/?p=76#comment-4963 Hi, It's crystal clear. Thank you very much. Keep up with the good works. Regards Nicolas. Hi,

It’s crystal clear. Thank you very much. Keep up with the good works.

Regards

Nicolas.

]]> By: Edwin Prakoso http://cad-notes.com/2009/09/creating-your-own-autocad-palette/#comment-4959 Edwin Prakoso Tue, 13 Jul 2010 09:27:39 +0000 http://cad-notes.com/?p=76#comment-4959 Nicolas, You can export the palettes before delete it, so you can restore it later. But if you already delete it, then you can't get it back. You can't create a nested palette, but you can manage them in a palette group. So you can quickly switch between palettes by right clicking above the palette title and select the group from the list. You can manage palettes and groups by right clicking above palette and select <strong>customize palettes...</strong> Is it close to what you are looking for? I hope it's clear enough. Nicolas,
You can export the palettes before delete it, so you can restore it later. But if you already delete it, then you can’t get it back. You can’t create a nested palette, but you can manage them in a palette group. So you can quickly switch between palettes by right clicking above the palette title and select the group from the list. You can manage palettes and groups by right clicking above palette and select customize palettes…
Is it close to what you are looking for? I hope it’s clear enough.

]]> By: Nicolas MARIE http://cad-notes.com/2009/09/creating-your-own-autocad-palette/#comment-4925 Nicolas MARIE Mon, 12 Jul 2010 17:22:58 +0000 http://cad-notes.com/?p=76#comment-4925 Hi, I have been creating numerous tools palette of blocks to the extent that I needed to delete the default ones. Are there any ways to get them back or to collapse some of the palette i.e nested palette. I am also looking for doing the same with layout tabs ... too much of them .. Thank you. The notes and tutorials here are amazing. Nicolas. Hi,

I have been creating numerous tools palette of blocks to the extent that I needed to delete the default ones. Are there any ways to get them back or to collapse some of the palette i.e nested palette. I am also looking for doing the same with layout tabs … too much of them ..

Thank you. The notes and tutorials here are amazing.

Nicolas.

]]> By: EdwinPrakoso http://cad-notes.com/2009/09/creating-your-own-autocad-palette/#comment-40695 EdwinPrakoso Mon, 25 Jan 2010 19:38:07 +0000 http://cad-notes.com/?p=76#comment-40695 I have never found this issue before. I searched in Autodesk support page, there's no similar issue has been reported. The 'choppy' graphics and the CPU fan shows that your CPU works hard when you do that. You may need to wait a little bit longer. But I don't think this issue related to your computer specification, because you can run Inventor on your PC. I have never found this issue before. I searched in Autodesk support page, there’s no similar issue has been reported.
The ‘choppy’ graphics and the CPU fan shows that your CPU works hard when you do that. You may need to wait a little bit longer. But I don’t think this issue related to your computer specification, because you can run Inventor on your PC.

]]> By: fbyrne http://cad-notes.com/2009/09/creating-your-own-autocad-palette/#comment-40694 fbyrne Mon, 25 Jan 2010 12:13:25 +0000 http://cad-notes.com/?p=76#comment-40694 I also noticed that if I open the Customizr Userr Interface, I can drag and drop commands from there onto my tool palette with no problem. I also noticed that if I open the Customizr Userr Interface, I can drag and drop commands from there onto my tool palette with no problem.

]]> By: fbyrne http://cad-notes.com/2009/09/creating-your-own-autocad-palette/#comment-40693 fbyrne Mon, 25 Jan 2010 12:01:55 +0000 http://cad-notes.com/?p=76#comment-40693 Yes- I can drag objects to other positions and also drag the palette. I checked also that the palette is not locked. I noticed that the graphics near the pointer get'choppy' when it's near the palette when I'm trying to drag-also I can hear the processor fan work really hard! My installation is a stand-alone Inventor suite, Acad version D.215.0.0, Mechanical 2010 Version2. I'm running Windows XP with SP3 installed. Yes- I can drag objects to other positions and also drag the palette. I checked also that the palette is not locked. I noticed that the graphics near the pointer get’choppy’ when it’s near the palette when I’m trying to drag-also I can hear the processor fan work really hard!
My installation is a stand-alone Inventor suite, Acad version D.215.0.0, Mechanical 2010 Version2.
I’m running Windows XP with SP3 installed.

]]> By: EdwinPrakoso http://cad-notes.com/2009/09/creating-your-own-autocad-palette/#comment-40692 EdwinPrakoso Mon, 25 Jan 2010 03:45:27 +0000 http://cad-notes.com/?p=76#comment-40692 Or probably you lock the palettes by accident? Or probably you lock the palettes by accident?

]]> By: EdwinPrakoso http://cad-notes.com/2009/09/creating-your-own-autocad-palette/#comment-40691 EdwinPrakoso Sat, 23 Jan 2010 07:47:21 +0000 http://cad-notes.com/?p=76#comment-40691 Can you drag your objects to another position? Dragging objects can be tricky if you are not used to it. I'll try to find if there's any issue related to this. Which version are you using? Can you drag your objects to another position? Dragging objects can be
tricky if you are not used to it. I’ll try to find if there’s any
issue related to this. Which version are you using?

]]>